PARAMETERS

20,000 puffs

Nic 3mg/ml

20ml

750mAh

Brand Battery

LED

ARTERY-CL7

PACKAGES

Frequently Asked Questions

Troubleshooting, Coils & Power

My ARTERY CL7 shows the error "Check Atomizer" or "No Coil Detected." What is the fix?

This is a common error on regulated pod mods and means the device cannot read the coil resistance. Here is the standard troubleshooting procedure:

Re-seat the Pod: Remove the pod and reinsert it, ensuring it sits firmly in place.
Clean Contacts: Wipe the metallic contacts on the bottom of the pod and inside the device with a dry tissue. E-liquid condensation is the most frequent cause.
Inspect/Replace Coil: If the error persists, ensure the coil is fully pushed into the pod base. If the issue continues, the coil is likely defective and needs replacement.

What is the wattage range of the ARTERY CL7, and which coils are compatible?

The ARTERY CL7 is an advanced device typically supporting a higher wattage range (e.g., up to 80W).

Coil Compatibility: The device uses the dedicated ARTERY [CL Series or specific name] coils. Always match your wattage to the recommended range printed on the side of your physical coil to prevent burning.
Low Resistance Coils (e.g., 0.4Ω): Use higher wattage for DTL (Direct-to-Lung) vaping.
High Resistance Coils (e.g., 1.0Ω): Use lower wattage for MTL (Mouth-to-Lung) vaping.

What is the battery capacity of the ARTERY CL7, and how do I lock the wattage?

The ARTERY CL7 usually features a robust internal battery for extended use (e.g., 2000mAh).

On/Off: Press the main firing button 5 times quickly.
Lock/Unlock Wattage: Press the main button 3 times quickly. This prevents accidental wattage changes when the device is in your pocket or bag.

Maintenance & E-Liquid

How do I refill the ARTERY CL7 pod, and what's the best way to prevent leaking?

The ARTERY CL7 pod typically uses a convenient top-fill system (look for the rubber plug under the mouthpiece).

Refilling: Open the rubber plug and fill the pod slowly. Do not overfill past the indicator mark or past 90%—leave a small air bubble to maintain the internal vacuum.
Sealing: Ensure the fill plug is fully and tightly sealed after closing. Wiping any excess liquid from the pod top before reinserting it helps prevent condensation buildup and leaks.

Is the ARTERY CL7 best for Nic Salt or Freebase e-liquids?

The CL7's versatility allows for both, depending on the coil resistance you are using:

Nic Salts (High Nicotine): Best used with higher resistance coils (e.g., 1.0Ω and above) and lower wattages for a smooth MTL experience.
Freebase E-Liquids (Low/Mid Nicotine): Best used with lower resistance coils (e.g., 0.4Ω to 0.8Ω) and higher wattages for DTL vaping.